Aluminium extrusion analysis by the finite volume method

Present work proposes a novel numerical scheme to calculate stress and velocity fields of metal flow in axisymmetric extrusion process in steady state. Extrusion of aluminium is one main metal forming process largely applied in manufacturing bars and products with complex cross section shape. The upper-bound, slab, slip-line methods and more recently the numerical methods such as the Finite Element Method have been commonly applied in aluminium extrusion analysis. However, recently in the academy, the Finite Volume Method has been developed for metal flow analysis: literature suggests that extrusion of metals can be modelled by the flow formulation. Hence, metal flow can be mathematically modelled such us an incompressible non linear viscous fluid, owing to volume constancy and varying viscosity in metal forming. The governing equations were discretized by the Finite Volume Method, using the Explicit MacCormack Method in structured and collocated mesh. The MacCormack Method is commonly used to simulate compressible fluid flow by the finite volume method. However, metal plastic flow and incompressible fluid flow do not present state equations for the evolution of pressure, and therefore, a velocity-pressure coupling method is necessary to obtain a consistent velocity and pressure fields. The SIMPLE Method was applied to attain pressure-velocity coupling. This new numerical scheme was applied to forward hot extrusion process of an aluminium alloy. The metal extrusion velocity fields achieved fast convergence and a good agreement with experimental results. The MacCormack Method applied to metal extrusion produced consistent results without the need of artificial viscosity as employed by the compressible flow simulation approaches. Therefore, present numerical results also suggest that MacCormack method together with SIMPLE method can be applied in the solution of metal forming processes in addition to the traditional application for compressible fluid flow

Lead extrusion analysis by finite volume method

Computational numerical simulation is nowadays largely applied in the design and analysis of metal forming process. Extrusion of metals is one main forming process largely applied in the manufacturing of metallic products or parts. Historically, the Finite Element Method has been applied for decades in metal extrusion analysis [4]. However, recently in the academy, there is a trend to use Finite Volume Method: literature suggests that metal flow by extrusion can be analyzed by the flow formulation [1, 2]. Thus, metal flow can be modelled such us an incompressible viscous fluid [2]. This hypothesis can be assumed because extrusion process is an isochoric process. The MacCormack Method is commonly used to simulate compressible fluid flow by the finite volume method [3]. However, metal extrusion and incompressible fluid flow do not present state equations for the evolution of pressure, and therefore, a velocity-pressure coupling method is necessary to obtain a consistent velocity and pressure fields [3]. Present work proposes a new numerical scheme to obtain information about metal flow in the extrusion process, in steady state. The governing equations were discretized by Finite Volume Method, using the Explicit MacCormack Method to structured and collocated mesh. The SIMPLE Method was applied to attain pressure-velocity coupling [3]. These new numerical scheme was applied to forward extrusion process of lead. The incompressible metal extrusion velocity fields achieved faster convergence and a good agreement with analytical and experimental results obtained from literature. The MacCormack Method applied for metals produced consistent results without the need of artificial viscosity as employed by the compressible flow simulation approaches. Furthermore, the present numerical results also suggest that MacCormack Method and SIMPLE can be applied in the solution of metal forming processes besides the traditional application for compressible fluid flow

GALEX UV Color Relations for Nearby Early-Type Galaxies

We use GALEX/optical photometry to construct color-color relationships for early-type galaxies sorted by morphological type. We have matched objects in the GALEX GR1 public release and the first IR1.1 internal release, with the RC3 early-type galaxies having a morphological type -5.5<T<-1.5 with mean error in T<1.5, and mean error on (B-V)T<0.05. After visual inspection of each match, we are left with 130 galaxies with a reliable GALEX pipeline photometry in the far-UV and near-UV bands. This sample is divided into Ellipticals (-5.5<T<-3.5) and Lenticulars (-3.5<T<-1.5). After correction for the Galactic extinction, the color-color diagrams FUV-NUV vs. (B-V)_{Tc} are plotted for the two subsamples. We find a tight anti-correlation between the FUV-NUV and (B-V)_{Tc} colors for Ellipticals, the UV color getting bluer when the (B-V)_{Tc} get redder. This relationship very likely is an extension of the color-metallicity relationship into the GALEX NUV band. We suspect that the main source of the correlation is metal line blanketing in the NUV band. The FUV-NUV vs B-V correlation has larger scatter for lenticular galaxies; we speculate this reflects the presence of low level star formation. If the latter objects (i.e. those that are blue both in FUV-NUV and B-V) are interpreted as harboring recent star formation activity, this would be the case for a few percent (~4%) of Ellipticals and ~15% of Lenticulars; this would make about 10% of early-type galaxies with residual star formation in our full sample of 130 early-type galaxies. We also plot FUV-NUV vs. the Mg_2 index and central velocity dispersion. We find a tight anti-correlation between FUV-NUV and the Mg_2 index(...).Comment: 25 pages, 5 figures, accepted for publication in ApJS (abstract abridged), typos corrected in section 2.

Statistical Properties of the GALEX/SDSS matched source catalogs, and classification of the UV sources

We use the Galaxy Evolution Explorer (GALEX) Medium and All-Sky-Imaging Survey (MIS & AIS) data from the first public data release (GR1), matched to the Sloan Digital Sky Survey (SDSS) DR3 catalog, to perform source classification. The GALEX surveys provide photometry in far- and near-UV bands and the SDSS in five optical bands (u,g,r,i,z). The GR1/DR3 overlapping areas are 363[83]deg^2 for the GALEX AIS[MIS], for sources within the 0.5deg central area of the GALEX fields. Our sample covers mostly |b|>30deg galactic latitudes. We present statistical properties of the GALEX/SDSS matched sources catalog, containing >2x10^6 objects detected in at least one UV band. We classify the matched sources by comparing the seven-band photometry to model colors constructed for different classes of astrophysical objects. For sources with photometric errors <0.3 mag, the corresponding typical AB-magnitude limits are m_FUV~21.5, m_NUV~22.5 for AIS, and m_FUV~24, m_NUV~24.5 for MIS. At AIS depth, the number of Galactic and extragalactic objects are comparable, but the latter predominate in the MIS. Based on our stellar models, we estimate the GALEX surveys detect hot White Dwarfs throughout the Milky Way halo (down to a radius of 0.04 R_sun at MIS depth), providing an unprecedented improvement in the Galactic WD census. Their observed surface density is consistent with Milky Way model predictions. We also select low-redshift QSO candidates, extending the known QSO samples to lower magnitudes, and providing candidates for detailed z~1 follow-up investigations. SDSS optical spectra available for a large subsample confirm the classification for the photometrically selected candidates with 97% purity for single hot stars, ~45%(AIS)/31%(MIS) for binaries containing a hot star and a cooler companion, and about 85% for QSOs.Comment: 33 pages, 11 figures, accepted for the GALEX special issue of ApJS. For a version with full resolution figures see http://dolomiti.pha.jhu.edu/publgoto.htm

A pan-European epidemiological study reveals honey bee colony survival depends on beekeeper education and disease control

Reports of honey bee population decline has spurred many national efforts to understand the extent of the problem and to identify causative or associated factors. However, our collective understanding of the factors has been hampered by a lack of joined up trans-national effort. Moreover, the impacts of beekeeper knowledge and beekeeping management practices have often been overlooked, despite honey bees being a managed pollinator. Here, we established a standardised active monitoring network for 5 798 apiaries over two consecutive years to quantify honey bee colony mortality across 17 European countries. Our data demonstrate that overwinter losses ranged between 2% and 32%, and that high summer losses were likely to follow high winter losses. Multivariate Poisson regression models revealed that hobbyist beekeepers with small apiaries and little experience in beekeeping had double the winter mortality rate when compared to professional beekeepers. Furthermore, honey bees kept by professional beekeepers never showed signs of disease, unlike apiaries from hobbyist beekeepers that had symptoms of bacterial infection and heavy Varroa infestation. Our data highlight beekeeper background and apicultural practices as major drivers of honey bee colony losses. The benefits of conducting trans-national monitoring schemes and improving beekeeper training are discussed

Guidelines for the use and interpretation of assays for monitoring autophagy (3rd edition)

In 2008 we published the first set of guidelines for standardizing research in autophagy. Since then, research on this topic has continued to accelerate, and many new scientists have entered the field. Our knowledge base and relevant new technologies have also been expanding. Accordingly, it is important to update these guidelines for monitoring autophagy in different organisms. Various reviews have described the range of assays that have been used for this purpose. Nevertheless, there continues to be confusion regarding acceptable methods to measure autophagy, especially in multicellular eukaryotes. For example, a key point that needs to be emphasized is that there is a difference between measurements that monitor the numbers or volume of autophagic elements (e.g., autophagosomes or autolysosomes) at any stage of the autophagic process versus those that measure fl ux through the autophagy pathway (i.e., the complete process including the amount and rate of cargo sequestered and degraded). In particular, a block in macroautophagy that results in autophagosome accumulation must be differentiated from stimuli that increase autophagic activity, defi ned as increased autophagy induction coupled with increased delivery to, and degradation within, lysosomes (inmost higher eukaryotes and some protists such as Dictyostelium ) or the vacuole (in plants and fungi). In other words, it is especially important that investigators new to the fi eld understand that the appearance of more autophagosomes does not necessarily equate with more autophagy. In fact, in many cases, autophagosomes accumulate because of a block in trafficking to lysosomes without a concomitant change in autophagosome biogenesis, whereas an increase in autolysosomes may reflect a reduction in degradative activity. It is worth emphasizing here that lysosomal digestion is a stage of autophagy and evaluating its competence is a crucial part of the evaluation of autophagic flux, or complete autophagy. Here, we present a set of guidelines for the selection and interpretation of methods for use by investigators who aim to examine macroautophagy and related processes, as well as for reviewers who need to provide realistic and reasonable critiques of papers that are focused on these processes. These guidelines are not meant to be a formulaic set of rules, because the appropriate assays depend in part on the question being asked and the system being used. In addition, we emphasize that no individual assay is guaranteed to be the most appropriate one in every situation, and we strongly recommend the use of multiple assays to monitor autophagy. Along these lines, because of the potential for pleiotropic effects due to blocking autophagy through genetic manipulation it is imperative to delete or knock down more than one autophagy-related gene. In addition, some individual Atg proteins, or groups of proteins, are involved in other cellular pathways so not all Atg proteins can be used as a specific marker for an autophagic process. In these guidelines, we consider these various methods of assessing autophagy and what information can, or cannot, be obtained from them. Finally, by discussing the merits and limits of particular autophagy assays, we hope to encourage technical innovation in the field

Aluminium extrusion analysis by the finite volume method

Present work proposes a novel numerical scheme to calculate stress and velocity fields of metal flow in axisymmetric extrusion process in steady state. Extrusion of aluminium is one main metal forming process largely applied in manufacturing bars and products with complex cross section shape. The upper-bound, slab, slip-line methods and more recently the numerical methods such as the Finite Element Method have been commonly applied in aluminium extrusion analysis. However, recently in the academy, the Finite Volume Method has been developed for metal flow analysis: literature suggests that extrusion of metals can be modelled by the flow formulation. Hence, metal flow can be mathematically modelled such us an incompressible non linear viscous fluid, owing to volume constancy and varying viscosity in metal forming. The governing equations were discretized by the Finite Volume Method, using the Explicit MacCormack Method in structured and collocated mesh. The MacCormack Method is commonly used to simulate compressible fluid flow by the finite volume method. However, metal plastic flow and incompressible fluid flow do not present state equations for the evolution of pressure, and therefore, a velocity-pressure coupling method is necessary to obtain a consistent velocity and pressure fields. The SIMPLE Method was applied to attain pressure-velocity coupling. This new numerical scheme was applied to forward hot extrusion process of an aluminium alloy. The metal extrusion velocity fields achieved fast convergence and a good agreement with experimental results. The MacCormack Method applied to metal extrusion produced consistent results without the need of artificial viscosity as employed by the compressible flow simulation approaches. Therefore, present numerical results also suggest that MacCormack method together with SIMPLE method can be applied in the solution of metal forming processes in addition to the traditional application for compressible fluid flow

Fast methods for simultaneous determination of arginine, ascorbic acid and aspartic acid by capillary electrophoresis

Arginine (ARG), ascorbic acid (ASC) and aspartic acid (ASP) are very popular and widely consumed active ingredients used for fatigue treatment or improvement of physical performance. For this reason, these compounds are usually available in the same pharmaceutical formulation. In the current paper, we describe for the first-time methods for simultaneous determination of ARG, ASC and ASP using capillary electrophoresis with capacitively coupled contactless conductivity detection (CE-(CD)-D-4) and with UV spectrophotometric detection (CE-UV). The proposed methods are simple, rapid (78 and 23 injections h(-1), respectively) and have low environmental impact (minimal waste generation). The separation by CE-C4D was achieved with a background electrolyte (BGE) composed by 20 mmol L-1 N-tris(hydroxymethyl)- methyl]-3-aminopropanesulfonic acid (TAPS) and 10 mmol L-1 of NaOH (pH 8.7). The limits of detection (LOD) were 0.01, 0.02 and 0.04 mmol L-1 for ARG, ASC and ASP, respectively. The proposed CE-UV method was optimized with a BGE composed by 10 mmol L-1 sodium tetraborate (pH 9.4). The limits of detection (LOD) were 0.03, 0.02 and 0.04 mmol L-1 for ARG, ASC and ASP, respectively. No statistically significant differences were observed (95% confidence level) between the results obtained by the developed CE methods and reference procedures (HPLC for ARG, iodometry for ASC and, acid-base titration for ASP)204353358CONSELHO NACIONAL DE DESENVOLVIMENTO CIENTÍFICO E TECNOLÓGICO - CNPQCOORDENAÇÃO DE APERFEIÇOAMENTO DE PESSOAL DE NÍVEL SUPERIOR - CAPESFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE MINAS GERAIS - FAPEMIGFUNDAÇÃO DE AMPARO À PESQUISA DO ESTADO DE SÃO PAULO - FAPESP307333/2014-0; 307271/2017-0; 465389/2014-723038.007073/2014-12; 001CEX-APQ-02118-152014/50867-